# --- THIS FILE IS AUTO-GENERATED --- # Modifications will be overwitten the next time code generation run. from plotly.basedatatypes import BaseTraceType as _BaseTraceType import copy as _copy class Cone(_BaseTraceType): _parent_path_str = "" _path_str = "cone" _valid_props = { "anchor", "autocolorscale", "cauto", "cmax", "cmid", "cmin", "coloraxis", "colorbar", "colorscale", "customdata", "customdatasrc", "hoverinfo", "hoverinfosrc", "hoverlabel", "hovertemplate", "hovertemplatesrc", "hovertext", "hovertextsrc", "ids", "idssrc", "legend", "legendgroup", "legendgrouptitle", "legendrank", "legendwidth", "lighting", "lightposition", "meta", "metasrc", "name", "opacity", "reversescale", "scene", "showlegend", "showscale", "sizemode", "sizeref", "stream", "text", "textsrc", "type", "u", "uhoverformat", "uid", "uirevision", "usrc", "v", "vhoverformat", "visible", "vsrc", "w", "whoverformat", "wsrc", "x", "xhoverformat", "xsrc", "y", "yhoverformat", "ysrc", "z", "zhoverformat", "zsrc", } @property def anchor(self): """ Sets the cones' anchor with respect to their x/y/z positions. Note that "cm" denote the cone's center of mass which corresponds to 1/4 from the tail to tip. The 'anchor' property is an enumeration that may be specified as: - One of the following enumeration values: ['tip', 'tail', 'cm', 'center'] Returns ------- Any """ return self["anchor"] @anchor.setter def anchor(self, val): self["anchor"] = val @property def autocolorscale(self): """ Determines whether the colorscale is a default palette (`autocolorscale: true`) or the palette determined by `colorscale`. In case `colorscale` is unspecified or `autocolorscale` is true, the default palette will be chosen according to whether numbers in the `color` array are all positive, all negative or mixed. The 'autocolorscale' property must be specified as a bool (either True, or False) Returns ------- bool """ return self["autocolorscale"] @autocolorscale.setter def autocolorscale(self, val): self["autocolorscale"] = val @property def cauto(self): """ Determines whether or not the color domain is computed with respect to the input data (here u/v/w norm) or the bounds set in `cmin` and `cmax` Defaults to `false` when `cmin` and `cmax` are set by the user. The 'cauto' property must be specified as a bool (either True, or False) Returns ------- bool """ return self["cauto"] @cauto.setter def cauto(self, val): self["cauto"] = val @property def cmax(self): """ Sets the upper bound of the color domain. Value should have the same units as u/v/w norm and if set, `cmin` must be set as well. The 'cmax' property is a number and may be specified as: - An int or float Returns ------- int|float """ return self["cmax"] @cmax.setter def cmax(self, val): self["cmax"] = val @property def cmid(self): """ Sets the mid-point of the color domain by scaling `cmin` and/or `cmax` to be equidistant to this point. Value should have the same units as u/v/w norm. Has no effect when `cauto` is `false`. The 'cmid' property is a number and may be specified as: - An int or float Returns ------- int|float """ return self["cmid"] @cmid.setter def cmid(self, val): self["cmid"] = val @property def cmin(self): """ Sets the lower bound of the color domain. Value should have the same units as u/v/w norm and if set, `cmax` must be set as well. The 'cmin' property is a number and may be specified as: - An int or float Returns ------- int|float """ return self["cmin"] @cmin.setter def cmin(self, val): self["cmin"] = val @property def coloraxis(self): """ Sets a reference to a shared color axis. References to these shared color axes are "coloraxis", "coloraxis2", "coloraxis3", etc. Settings for these shared color axes are set in the layout, under `layout.coloraxis`, `layout.coloraxis2`, etc. Note that multiple color scales can be linked to the same color axis. The 'coloraxis' property is an identifier of a particular subplot, of type 'coloraxis', that may be specified as the string 'coloraxis' optionally followed by an integer >= 1 (e.g. 'coloraxis', 'coloraxis1', 'coloraxis2', 'coloraxis3', etc.) Returns ------- str """ return self["coloraxis"] @coloraxis.setter def coloraxis(self, val): self["coloraxis"] = val @property def colorbar(self): """ The 'colorbar' property is an instance of ColorBar that may be specified as: - An instance of :class:`plotly.graph_objs.cone.ColorBar` - A dict of string/value properties that will be passed to the ColorBar constructor Returns ------- plotly.graph_objs.cone.ColorBar """ return self["colorbar"] @colorbar.setter def colorbar(self, val): self["colorbar"] = val @property def colorscale(self): """ Sets the colorscale. The colorscale must be an array containing arrays mapping a normalized value to an rgb, rgba, hex, hsl, hsv, or named color string. At minimum, a mapping for the lowest (0) and highest (1) values are required. For example, `[[0, 'rgb(0,0,255)'], [1, 'rgb(255,0,0)']]`. To control the bounds of the colorscale in color space, use `cmin` and `cmax`. Alternatively, `colorscale` may be a palette name string of the following list: Blackbody,Bluered,Blues,Cividis,Earth,Electric, Greens,Greys,Hot,Jet,Picnic,Portland,Rainbow,RdBu,Reds,Viridis, YlGnBu,YlOrRd. The 'colorscale' property is a colorscale and may be specified as: - A list of colors that will be spaced evenly to create the colorscale. Many predefined colorscale lists are included in the sequential, diverging, and cyclical modules in the plotly.colors package. - A list of 2-element lists where the first element is the normalized color level value (starting at 0 and ending at 1), and the second item is a valid color string. (e.g. [[0, 'green'], [0.5, 'red'], [1.0, 'rgb(0, 0, 255)']]) - One of the following named colorscales: ['aggrnyl', 'agsunset', 'algae', 'amp', 'armyrose', 'balance', 'blackbody', 'bluered', 'blues', 'blugrn', 'bluyl', 'brbg', 'brwnyl', 'bugn', 'bupu', 'burg', 'burgyl', 'cividis', 'curl', 'darkmint', 'deep', 'delta', 'dense', 'earth', 'edge', 'electric', 'emrld', 'fall', 'geyser', 'gnbu', 'gray', 'greens', 'greys', 'haline', 'hot', 'hsv', 'ice', 'icefire', 'inferno', 'jet', 'magenta', 'magma', 'matter', 'mint', 'mrybm', 'mygbm', 'oranges', 'orrd', 'oryel', 'oxy', 'peach', 'phase', 'picnic', 'pinkyl', 'piyg', 'plasma', 'plotly3', 'portland', 'prgn', 'pubu', 'pubugn', 'puor', 'purd', 'purp', 'purples', 'purpor', 'rainbow', 'rdbu', 'rdgy', 'rdpu', 'rdylbu', 'rdylgn', 'redor', 'reds', 'solar', 'spectral', 'speed', 'sunset', 'sunsetdark', 'teal', 'tealgrn', 'tealrose', 'tempo', 'temps', 'thermal', 'tropic', 'turbid', 'turbo', 'twilight', 'viridis', 'ylgn', 'ylgnbu', 'ylorbr', 'ylorrd']. Appending '_r' to a named colorscale reverses it. Returns ------- str """ return self["colorscale"] @colorscale.setter def colorscale(self, val): self["colorscale"] = val @property def customdata(self): """ Assigns extra data each datum. This may be useful when listening to hover, click and selection events. Note that, "scatter" traces also appends customdata items in the markers DOM elements The 'customdata' property is an array that may be specified as a tuple, list, numpy array, or pandas Series Returns ------- numpy.ndarray """ return self["customdata"] @customdata.setter def customdata(self, val): self["customdata"] = val @property def customdatasrc(self): """ Sets the source reference on Chart Studio Cloud for `customdata`. The 'customdatasrc' property must be specified as a string or as a plotly.grid_objs.Column object Returns ------- str """ return self["customdatasrc"] @customdatasrc.setter def customdatasrc(self, val): self["customdatasrc"] = val @property def hoverinfo(self): """ Determines which trace information appear on hover. If `none` or `skip` are set, no information is displayed upon hovering. But, if `none` is set, click and hover events are still fired. The 'hoverinfo' property is a flaglist and may be specified as a string containing: - Any combination of ['x', 'y', 'z', 'u', 'v', 'w', 'norm', 'text', 'name'] joined with '+' characters (e.g. 'x+y') OR exactly one of ['all', 'none', 'skip'] (e.g. 'skip') - A list or array of the above Returns ------- Any|numpy.ndarray """ return self["hoverinfo"] @hoverinfo.setter def hoverinfo(self, val): self["hoverinfo"] = val @property def hoverinfosrc(self): """ Sets the source reference on Chart Studio Cloud for `hoverinfo`. The 'hoverinfosrc' property must be specified as a string or as a plotly.grid_objs.Column object Returns ------- str """ return self["hoverinfosrc"] @hoverinfosrc.setter def hoverinfosrc(self, val): self["hoverinfosrc"] = val @property def hoverlabel(self): """ The 'hoverlabel' property is an instance of Hoverlabel that may be specified as: - An instance of :class:`plotly.graph_objs.cone.Hoverlabel` - A dict of string/value properties that will be passed to the Hoverlabel constructor Returns ------- plotly.graph_objs.cone.Hoverlabel """ return self["hoverlabel"] @hoverlabel.setter def hoverlabel(self, val): self["hoverlabel"] = val @property def hovertemplate(self): """ Template string used for rendering the information that appear on hover box. Note that this will override `hoverinfo`. Variables are inserted using %{variable}, for example "y: %{y}" as well as %{xother}, {%_xother}, {%_xother_}, {%xother_}. When showing info for several points, "xother" will be added to those with different x positions from the first point. An underscore before or after "(x|y)other" will add a space on that side, only when this field is shown. Numbers are formatted using d3-format's syntax %{variable:d3-format}, for example "Price: %{y:$.2f}". https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format's syntax %{variable|d3-time-format}, for example "Day: %{2019-01-01|%A}". https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format for details on the date formatting syntax. The variables available in `hovertemplate` are the ones emitted as event data described at this link https://plotly.com/javascript/plotlyjs-events/#event-data. Additionally, every attributes that can be specified per-point (the ones that are `arrayOk: true`) are available. Finally, the template string has access to variable `norm` Anything contained in tag `` is displayed in the secondary box, for example "{fullData.name}". To hide the secondary box completely, use an empty tag ``. The 'hovertemplate' property is a string and must be specified as: - A string - A number that will be converted to a string - A tuple, list, or one-dimensional numpy array of the above Returns ------- str|numpy.ndarray """ return self["hovertemplate"] @hovertemplate.setter def hovertemplate(self, val): self["hovertemplate"] = val @property def hovertemplatesrc(self): """ Sets the source reference on Chart Studio Cloud for `hovertemplate`. The 'hovertemplatesrc' property must be specified as a string or as a plotly.grid_objs.Column object Returns ------- str """ return self["hovertemplatesrc"] @hovertemplatesrc.setter def hovertemplatesrc(self, val): self["hovertemplatesrc"] = val @property def hovertext(self): """ Same as `text`. The 'hovertext' property is a string and must be specified as: - A string - A number that will be converted to a string - A tuple, list, or one-dimensional numpy array of the above Returns ------- str|numpy.ndarray """ return self["hovertext"] @hovertext.setter def hovertext(self, val): self["hovertext"] = val @property def hovertextsrc(self): """ Sets the source reference on Chart Studio Cloud for `hovertext`. The 'hovertextsrc' property must be specified as a string or as a plotly.grid_objs.Column object Returns ------- str """ return self["hovertextsrc"] @hovertextsrc.setter def hovertextsrc(self, val): self["hovertextsrc"] = val @property def ids(self): """ Assigns id labels to each datum. These ids for object constancy of data points during animation. Should be an array of strings, not numbers or any other type. The 'ids' property is an array that may be specified as a tuple, list, numpy array, or pandas Series Returns ------- numpy.ndarray """ return self["ids"] @ids.setter def ids(self, val): self["ids"] = val @property def idssrc(self): """ Sets the source reference on Chart Studio Cloud for `ids`. The 'idssrc' property must be specified as a string or as a plotly.grid_objs.Column object Returns ------- str """ return self["idssrc"] @idssrc.setter def idssrc(self, val): self["idssrc"] = val @property def legend(self): """ Sets the reference to a legend to show this trace in. References to these legends are "legend", "legend2", "legend3", etc. Settings for these legends are set in the layout, under `layout.legend`, `layout.legend2`, etc. The 'legend' property is an identifier of a particular subplot, of type 'legend', that may be specified as the string 'legend' optionally followed by an integer >= 1 (e.g. 'legend', 'legend1', 'legend2', 'legend3', etc.) Returns ------- str """ return self["legend"] @legend.setter def legend(self, val): self["legend"] = val @property def legendgroup(self): """ Sets the legend group for this trace. Traces and shapes part of the same legend group hide/show at the same time when toggling legend items. The 'legendgroup' property is a string and must be specified as: - A string - A number that will be converted to a string Returns ------- str """ return self["legendgroup"] @legendgroup.setter def legendgroup(self, val): self["legendgroup"] = val @property def legendgrouptitle(self): """ The 'legendgrouptitle' property is an instance of Legendgrouptitle that may be specified as: - An instance of :class:`plotly.graph_objs.cone.Legendgrouptitle` - A dict of string/value properties that will be passed to the Legendgrouptitle constructor Returns ------- plotly.graph_objs.cone.Legendgrouptitle """ return self["legendgrouptitle"] @legendgrouptitle.setter def legendgrouptitle(self, val): self["legendgrouptitle"] = val @property def legendrank(self): """ Sets the legend rank for this trace. Items and groups with smaller ranks are presented on top/left side while with "reversed" `legend.traceorder` they are on bottom/right side. The default legendrank is 1000, so that you can use ranks less than 1000 to place certain items before all unranked items, and ranks greater than 1000 to go after all unranked items. When having unranked or equal rank items shapes would be displayed after traces i.e. according to their order in data and layout. The 'legendrank' property is a number and may be specified as: - An int or float Returns ------- int|float """ return self["legendrank"] @legendrank.setter def legendrank(self, val): self["legendrank"] = val @property def legendwidth(self): """ Sets the width (in px or fraction) of the legend for this trace. The 'legendwidth' property is a number and may be specified as: - An int or float in the interval [0, inf] Returns ------- int|float """ return self["legendwidth"] @legendwidth.setter def legendwidth(self, val): self["legendwidth"] = val @property def lighting(self): """ The 'lighting' property is an instance of Lighting that may be specified as: - An instance of :class:`plotly.graph_objs.cone.Lighting` - A dict of string/value properties that will be passed to the Lighting constructor Returns ------- plotly.graph_objs.cone.Lighting """ return self["lighting"] @lighting.setter def lighting(self, val): self["lighting"] = val @property def lightposition(self): """ The 'lightposition' property is an instance of Lightposition that may be specified as: - An instance of :class:`plotly.graph_objs.cone.Lightposition` - A dict of string/value properties that will be passed to the Lightposition constructor Returns ------- plotly.graph_objs.cone.Lightposition """ return self["lightposition"] @lightposition.setter def lightposition(self, val): self["lightposition"] = val @property def meta(self): """ Assigns extra meta information associated with this trace that can be used in various text attributes. Attributes such as trace `name`, graph, axis and colorbar `title.text`, annotation `text` `rangeselector`, `updatemenues` and `sliders` `label` text all support `meta`. To access the trace `meta` values in an attribute in the same trace, simply use `%{meta[i]}` where `i` is the index or key of the `meta` item in question. To access trace `meta` in layout attributes, use `%{data[n[.meta[i]}` where `i` is the index or key of the `meta` and `n` is the trace index. The 'meta' property accepts values of any type Returns ------- Any|numpy.ndarray """ return self["meta"] @meta.setter def meta(self, val): self["meta"] = val @property def metasrc(self): """ Sets the source reference on Chart Studio Cloud for `meta`. The 'metasrc' property must be specified as a string or as a plotly.grid_objs.Column object Returns ------- str """ return self["metasrc"] @metasrc.setter def metasrc(self, val): self["metasrc"] = val @property def name(self): """ Sets the trace name. The trace name appears as the legend item and on hover. The 'name' property is a string and must be specified as: - A string - A number that will be converted to a string Returns ------- str """ return self["name"] @name.setter def name(self, val): self["name"] = val @property def opacity(self): """ Sets the opacity of the surface. Please note that in the case of using high `opacity` values for example a value greater than or equal to 0.5 on two surfaces (and 0.25 with four surfaces), an overlay of multiple transparent surfaces may not perfectly be sorted in depth by the webgl API. This behavior may be improved in the near future and is subject to change. The 'opacity' property is a number and may be specified as: - An int or float in the interval [0, 1] Returns ------- int|float """ return self["opacity"] @opacity.setter def opacity(self, val): self["opacity"] = val @property def reversescale(self): """ Reverses the color mapping if true. If true, `cmin` will correspond to the last color in the array and `cmax` will correspond to the first color. The 'reversescale' property must be specified as a bool (either True, or False) Returns ------- bool """ return self["reversescale"] @reversescale.setter def reversescale(self, val): self["reversescale"] = val @property def scene(self): """ Sets a reference between this trace's 3D coordinate system and a 3D scene. If "scene" (the default value), the (x,y,z) coordinates refer to `layout.scene`. If "scene2", the (x,y,z) coordinates refer to `layout.scene2`, and so on. The 'scene' property is an identifier of a particular subplot, of type 'scene', that may be specified as the string 'scene' optionally followed by an integer >= 1 (e.g. 'scene', 'scene1', 'scene2', 'scene3', etc.) Returns ------- str """ return self["scene"] @scene.setter def scene(self, val): self["scene"] = val @property def showlegend(self): """ Determines whether or not an item corresponding to this trace is shown in the legend. The 'showlegend' property must be specified as a bool (either True, or False) Returns ------- bool """ return self["showlegend"] @showlegend.setter def showlegend(self, val): self["showlegend"] = val @property def showscale(self): """ Determines whether or not a colorbar is displayed for this trace. The 'showscale' property must be specified as a bool (either True, or False) Returns ------- bool """ return self["showscale"] @showscale.setter def showscale(self, val): self["showscale"] = val @property def sizemode(self): """ Determines whether `sizeref` is set as a "scaled" (i.e unitless) scalar (normalized by the max u/v/w norm in the vector field) or as "absolute" value (in the same units as the vector field). To display sizes in actual vector length use "raw". The 'sizemode' property is an enumeration that may be specified as: - One of the following enumeration values: ['scaled', 'absolute', 'raw'] Returns ------- Any """ return self["sizemode"] @sizemode.setter def sizemode(self, val): self["sizemode"] = val @property def sizeref(self): """ Adjusts the cone size scaling. The size of the cones is determined by their u/v/w norm multiplied a factor and `sizeref`. This factor (computed internally) corresponds to the minimum "time" to travel across two successive x/y/z positions at the average velocity of those two successive positions. All cones in a given trace use the same factor. With `sizemode` set to "raw", its default value is 1. With `sizemode` set to "scaled", `sizeref` is unitless, its default value is 0.5. With `sizemode` set to "absolute", `sizeref` has the same units as the u/v/w vector field, its the default value is half the sample's maximum vector norm. The 'sizeref' property is a number and may be specified as: - An int or float in the interval [0, inf] Returns ------- int|float """ return self["sizeref"] @sizeref.setter def sizeref(self, val): self["sizeref"] = val @property def stream(self): """ The 'stream' property is an instance of Stream that may be specified as: - An instance of :class:`plotly.graph_objs.cone.Stream` - A dict of string/value properties that will be passed to the Stream constructor Returns ------- plotly.graph_objs.cone.Stream """ return self["stream"] @stream.setter def stream(self, val): self["stream"] = val @property def text(self): """ Sets the text elements associated with the cones. If trace `hoverinfo` contains a "text" flag and "hovertext" is not set, these elements will be seen in the hover labels. The 'text' property is a string and must be specified as: - A string - A number that will be converted to a string - A tuple, list, or one-dimensional numpy array of the above Returns ------- str|numpy.ndarray """ return self["text"] @text.setter def text(self, val): self["text"] = val @property def textsrc(self): """ Sets the source reference on Chart Studio Cloud for `text`. The 'textsrc' property must be specified as a string or as a plotly.grid_objs.Column object Returns ------- str """ return self["textsrc"] @textsrc.setter def textsrc(self, val): self["textsrc"] = val @property def u(self): """ Sets the x components of the vector field. The 'u' property is an array that may be specified as a tuple, list, numpy array, or pandas Series Returns ------- numpy.ndarray """ return self["u"] @u.setter def u(self, val): self["u"] = val @property def uhoverformat(self): """ Sets the hover text formatting rulefor `u` using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format.By default the values are formatted using generic number format. The 'uhoverformat' property is a string and must be specified as: - A string - A number that will be converted to a string Returns ------- str """ return self["uhoverformat"] @uhoverformat.setter def uhoverformat(self, val): self["uhoverformat"] = val @property def uid(self): """ Assign an id to this trace, Use this to provide object constancy between traces during animations and transitions. The 'uid' property is a string and must be specified as: - A string - A number that will be converted to a string Returns ------- str """ return self["uid"] @uid.setter def uid(self, val): self["uid"] = val @property def uirevision(self): """ Controls persistence of some user-driven changes to the trace: `constraintrange` in `parcoords` traces, as well as some `editable: true` modifications such as `name` and `colorbar.title`. Defaults to `layout.uirevision`. Note that other user-driven trace attribute changes are controlled by `layout` attributes: `trace.visible` is controlled by `layout.legend.uirevision`, `selectedpoints` is controlled by `layout.selectionrevision`, and `colorbar.(x|y)` (accessible with `config: {editable: true}`) is controlled by `layout.editrevision`. Trace changes are tracked by `uid`, which only falls back on trace index if no `uid` is provided. So if your app can add/remove traces before the end of the `data` array, such that the same trace has a different index, you can still preserve user-driven changes if you give each trace a `uid` that stays with it as it moves. The 'uirevision' property accepts values of any type Returns ------- Any """ return self["uirevision"] @uirevision.setter def uirevision(self, val): self["uirevision"] = val @property def usrc(self): """ Sets the source reference on Chart Studio Cloud for `u`. The 'usrc' property must be specified as a string or as a plotly.grid_objs.Column object Returns ------- str """ return self["usrc"] @usrc.setter def usrc(self, val): self["usrc"] = val @property def v(self): """ Sets the y components of the vector field. The 'v' property is an array that may be specified as a tuple, list, numpy array, or pandas Series Returns ------- numpy.ndarray """ return self["v"] @v.setter def v(self, val): self["v"] = val @property def vhoverformat(self): """ Sets the hover text formatting rulefor `v` using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format.By default the values are formatted using generic number format. The 'vhoverformat' property is a string and must be specified as: - A string - A number that will be converted to a string Returns ------- str """ return self["vhoverformat"] @vhoverformat.setter def vhoverformat(self, val): self["vhoverformat"] = val @property def visible(self): """ Determines whether or not this trace is visible. If "legendonly", the trace is not drawn, but can appear as a legend item (provided that the legend itself is visible). The 'visible' property is an enumeration that may be specified as: - One of the following enumeration values: [True, False, 'legendonly'] Returns ------- Any """ return self["visible"] @visible.setter def visible(self, val): self["visible"] = val @property def vsrc(self): """ Sets the source reference on Chart Studio Cloud for `v`. The 'vsrc' property must be specified as a string or as a plotly.grid_objs.Column object Returns ------- str """ return self["vsrc"] @vsrc.setter def vsrc(self, val): self["vsrc"] = val @property def w(self): """ Sets the z components of the vector field. The 'w' property is an array that may be specified as a tuple, list, numpy array, or pandas Series Returns ------- numpy.ndarray """ return self["w"] @w.setter def w(self, val): self["w"] = val @property def whoverformat(self): """ Sets the hover text formatting rulefor `w` using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format.By default the values are formatted using generic number format. The 'whoverformat' property is a string and must be specified as: - A string - A number that will be converted to a string Returns ------- str """ return self["whoverformat"] @whoverformat.setter def whoverformat(self, val): self["whoverformat"] = val @property def wsrc(self): """ Sets the source reference on Chart Studio Cloud for `w`. The 'wsrc' property must be specified as a string or as a plotly.grid_objs.Column object Returns ------- str """ return self["wsrc"] @wsrc.setter def wsrc(self, val): self["wsrc"] = val @property def x(self): """ Sets the x coordinates of the vector field and of the displayed cones. The 'x' property is an array that may be specified as a tuple, list, numpy array, or pandas Series Returns ------- numpy.ndarray """ return self["x"] @x.setter def x(self, val): self["x"] = val @property def xhoverformat(self): """ Sets the hover text formatting rulefor `x` using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format. We add two items to d3's date formatter: "%h" for half of the year as a decimal number as well as "%{n}f" for fractional seconds with n digits. For example, *2016-10-13 09:15:23.456* with tickformat "%H~%M~%S.%2f" would display *09~15~23.46*By default the values are formatted using `xaxis.hoverformat`. The 'xhoverformat' property is a string and must be specified as: - A string - A number that will be converted to a string Returns ------- str """ return self["xhoverformat"] @xhoverformat.setter def xhoverformat(self, val): self["xhoverformat"] = val @property def xsrc(self): """ Sets the source reference on Chart Studio Cloud for `x`. The 'xsrc' property must be specified as a string or as a plotly.grid_objs.Column object Returns ------- str """ return self["xsrc"] @xsrc.setter def xsrc(self, val): self["xsrc"] = val @property def y(self): """ Sets the y coordinates of the vector field and of the displayed cones. The 'y' property is an array that may be specified as a tuple, list, numpy array, or pandas Series Returns ------- numpy.ndarray """ return self["y"] @y.setter def y(self, val): self["y"] = val @property def yhoverformat(self): """ Sets the hover text formatting rulefor `y` using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format. We add two items to d3's date formatter: "%h" for half of the year as a decimal number as well as "%{n}f" for fractional seconds with n digits. For example, *2016-10-13 09:15:23.456* with tickformat "%H~%M~%S.%2f" would display *09~15~23.46*By default the values are formatted using `yaxis.hoverformat`. The 'yhoverformat' property is a string and must be specified as: - A string - A number that will be converted to a string Returns ------- str """ return self["yhoverformat"] @yhoverformat.setter def yhoverformat(self, val): self["yhoverformat"] = val @property def ysrc(self): """ Sets the source reference on Chart Studio Cloud for `y`. The 'ysrc' property must be specified as a string or as a plotly.grid_objs.Column object Returns ------- str """ return self["ysrc"] @ysrc.setter def ysrc(self, val): self["ysrc"] = val @property def z(self): """ Sets the z coordinates of the vector field and of the displayed cones. The 'z' property is an array that may be specified as a tuple, list, numpy array, or pandas Series Returns ------- numpy.ndarray """ return self["z"] @z.setter def z(self, val): self["z"] = val @property def zhoverformat(self): """ Sets the hover text formatting rulefor `z` using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format. We add two items to d3's date formatter: "%h" for half of the year as a decimal number as well as "%{n}f" for fractional seconds with n digits. For example, *2016-10-13 09:15:23.456* with tickformat "%H~%M~%S.%2f" would display *09~15~23.46*By default the values are formatted using `zaxis.hoverformat`. The 'zhoverformat' property is a string and must be specified as: - A string - A number that will be converted to a string Returns ------- str """ return self["zhoverformat"] @zhoverformat.setter def zhoverformat(self, val): self["zhoverformat"] = val @property def zsrc(self): """ Sets the source reference on Chart Studio Cloud for `z`. The 'zsrc' property must be specified as a string or as a plotly.grid_objs.Column object Returns ------- str """ return self["zsrc"] @zsrc.setter def zsrc(self, val): self["zsrc"] = val @property def type(self): return self._props["type"] @property def _prop_descriptions(self): return """\ anchor Sets the cones' anchor with respect to their x/y/z positions. Note that "cm" denote the cone's center of mass which corresponds to 1/4 from the tail to tip. autocolorscale Determines whether the colorscale is a default palette (`autocolorscale: true`) or the palette determined by `colorscale`. In case `colorscale` is unspecified or `autocolorscale` is true, the default palette will be chosen according to whether numbers in the `color` array are all positive, all negative or mixed. cauto Determines whether or not the color domain is computed with respect to the input data (here u/v/w norm) or the bounds set in `cmin` and `cmax` Defaults to `false` when `cmin` and `cmax` are set by the user. cmax Sets the upper bound of the color domain. Value should have the same units as u/v/w norm and if set, `cmin` must be set as well. cmid Sets the mid-point of the color domain by scaling `cmin` and/or `cmax` to be equidistant to this point. Value should have the same units as u/v/w norm. Has no effect when `cauto` is `false`. cmin Sets the lower bound of the color domain. Value should have the same units as u/v/w norm and if set, `cmax` must be set as well. coloraxis Sets a reference to a shared color axis. References to these shared color axes are "coloraxis", "coloraxis2", "coloraxis3", etc. Settings for these shared color axes are set in the layout, under `layout.coloraxis`, `layout.coloraxis2`, etc. Note that multiple color scales can be linked to the same color axis. colorbar :class:`plotly.graph_objects.cone.ColorBar` instance or dict with compatible properties colorscale Sets the colorscale. The colorscale must be an array containing arrays mapping a normalized value to an rgb, rgba, hex, hsl, hsv, or named color string. At minimum, a mapping for the lowest (0) and highest (1) values are required. For example, `[[0, 'rgb(0,0,255)'], [1, 'rgb(255,0,0)']]`. To control the bounds of the colorscale in color space, use `cmin` and `cmax`. Alternatively, `colorscale` may be a palette name string of the following list: Blackbody,Bluered,Blues,C ividis,Earth,Electric,Greens,Greys,Hot,Jet,Picnic,Portl and,Rainbow,RdBu,Reds,Viridis,YlGnBu,YlOrRd. customdata Assigns extra data each datum. This may be useful when listening to hover, click and selection events. Note that, "scatter" traces also appends customdata items in the markers DOM elements customdatasrc Sets the source reference on Chart Studio Cloud for `customdata`. hoverinfo Determines which trace information appear on hover. If `none` or `skip` are set, no information is displayed upon hovering. But, if `none` is set, click and hover events are still fired. hoverinfosrc Sets the source reference on Chart Studio Cloud for `hoverinfo`. hoverlabel :class:`plotly.graph_objects.cone.Hoverlabel` instance or dict with compatible properties hovertemplate Template string used for rendering the information that appear on hover box. Note that this will override `hoverinfo`. Variables are inserted using %{variable}, for example "y: %{y}" as well as %{xother}, {%_xother}, {%_xother_}, {%xother_}. When showing info for several points, "xother" will be added to those with different x positions from the first point. An underscore before or after "(x|y)other" will add a space on that side, only when this field is shown. Numbers are formatted using d3-format's syntax %{variable:d3-format}, for example "Price: %{y:$.2f}". https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format's syntax %{variable|d3-time-format}, for example "Day: %{2019-01-01|%A}". https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format for details on the date formatting syntax. The variables available in `hovertemplate` are the ones emitted as event data described at this link https://plotly.com/javascript/plotlyjs-events/#event- data. Additionally, every attributes that can be specified per-point (the ones that are `arrayOk: true`) are available. Finally, the template string has access to variable `norm` Anything contained in tag `` is displayed in the secondary box, for example "{fullData.name}". To hide the secondary box completely, use an empty tag ``. hovertemplatesrc Sets the source reference on Chart Studio Cloud for `hovertemplate`. hovertext Same as `text`. hovertextsrc Sets the source reference on Chart Studio Cloud for `hovertext`. ids Assigns id labels to each datum. These ids for object constancy of data points during animation. Should be an array of strings, not numbers or any other type. idssrc Sets the source reference on Chart Studio Cloud for `ids`. legend Sets the reference to a legend to show this trace in. References to these legends are "legend", "legend2", "legend3", etc. Settings for these legends are set in the layout, under `layout.legend`, `layout.legend2`, etc. legendgroup Sets the legend group for this trace. Traces and shapes part of the same legend group hide/show at the same time when toggling legend items. legendgrouptitle :class:`plotly.graph_objects.cone.Legendgrouptitle` instance or dict with compatible properties legendrank Sets the legend rank for this trace. Items and groups with smaller ranks are presented on top/left side while with "reversed" `legend.traceorder` they are on bottom/right side. The default legendrank is 1000, so that you can use ranks less than 1000 to place certain items before all unranked items, and ranks greater than 1000 to go after all unranked items. When having unranked or equal rank items shapes would be displayed after traces i.e. according to their order in data and layout. legendwidth Sets the width (in px or fraction) of the legend for this trace. lighting :class:`plotly.graph_objects.cone.Lighting` instance or dict with compatible properties lightposition :class:`plotly.graph_objects.cone.Lightposition` instance or dict with compatible properties meta Assigns extra meta information associated with this trace that can be used in various text attributes. Attributes such as trace `name`, graph, axis and colorbar `title.text`, annotation `text` `rangeselector`, `updatemenues` and `sliders` `label` text all support `meta`. To access the trace `meta` values in an attribute in the same trace, simply use `%{meta[i]}` where `i` is the index or key of the `meta` item in question. To access trace `meta` in layout attributes, use `%{data[n[.meta[i]}` where `i` is the index or key of the `meta` and `n` is the trace index. metasrc Sets the source reference on Chart Studio Cloud for `meta`. name Sets the trace name. The trace name appears as the legend item and on hover. opacity Sets the opacity of the surface. Please note that in the case of using high `opacity` values for example a value greater than or equal to 0.5 on two surfaces (and 0.25 with four surfaces), an overlay of multiple transparent surfaces may not perfectly be sorted in depth by the webgl API. This behavior may be improved in the near future and is subject to change. reversescale Reverses the color mapping if true. If true, `cmin` will correspond to the last color in the array and `cmax` will correspond to the first color. scene Sets a reference between this trace's 3D coordinate system and a 3D scene. If "scene" (the default value), the (x,y,z) coordinates refer to `layout.scene`. If "scene2", the (x,y,z) coordinates refer to `layout.scene2`, and so on. showlegend Determines whether or not an item corresponding to this trace is shown in the legend. showscale Determines whether or not a colorbar is displayed for this trace. sizemode Determines whether `sizeref` is set as a "scaled" (i.e unitless) scalar (normalized by the max u/v/w norm in the vector field) or as "absolute" value (in the same units as the vector field). To display sizes in actual vector length use "raw". sizeref Adjusts the cone size scaling. The size of the cones is determined by their u/v/w norm multiplied a factor and `sizeref`. This factor (computed internally) corresponds to the minimum "time" to travel across two successive x/y/z positions at the average velocity of those two successive positions. All cones in a given trace use the same factor. With `sizemode` set to "raw", its default value is 1. With `sizemode` set to "scaled", `sizeref` is unitless, its default value is 0.5. With `sizemode` set to "absolute", `sizeref` has the same units as the u/v/w vector field, its the default value is half the sample's maximum vector norm. stream :class:`plotly.graph_objects.cone.Stream` instance or dict with compatible properties text Sets the text elements associated with the cones. If trace `hoverinfo` contains a "text" flag and "hovertext" is not set, these elements will be seen in the hover labels. textsrc Sets the source reference on Chart Studio Cloud for `text`. u Sets the x components of the vector field. uhoverformat Sets the hover text formatting rulefor `u` using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d 3/d3-format/tree/v1.4.5#d3-format.By default the values are formatted using generic number format. uid Assign an id to this trace, Use this to provide object constancy between traces during animations and transitions. uirevision Controls persistence of some user-driven changes to the trace: `constraintrange` in `parcoords` traces, as well as some `editable: true` modifications such as `name` and `colorbar.title`. Defaults to `layout.uirevision`. Note that other user-driven trace attribute changes are controlled by `layout` attributes: `trace.visible` is controlled by `layout.legend.uirevision`, `selectedpoints` is controlled by `layout.selectionrevision`, and `colorbar.(x|y)` (accessible with `config: {editable: true}`) is controlled by `layout.editrevision`. Trace changes are tracked by `uid`, which only falls back on trace index if no `uid` is provided. So if your app can add/remove traces before the end of the `data` array, such that the same trace has a different index, you can still preserve user-driven changes if you give each trace a `uid` that stays with it as it moves. usrc Sets the source reference on Chart Studio Cloud for `u`. v Sets the y components of the vector field. vhoverformat Sets the hover text formatting rulefor `v` using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d 3/d3-format/tree/v1.4.5#d3-format.By default the values are formatted using generic number format. visible Determines whether or not this trace is visible. If "legendonly", the trace is not drawn, but can appear as a legend item (provided that the legend itself is visible). vsrc Sets the source reference on Chart Studio Cloud for `v`. w Sets the z components of the vector field. whoverformat Sets the hover text formatting rulefor `w` using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d 3/d3-format/tree/v1.4.5#d3-format.By default the values are formatted using generic number format. wsrc Sets the source reference on Chart Studio Cloud for `w`. x Sets the x coordinates of the vector field and of the displayed cones. xhoverformat Sets the hover text formatting rulefor `x` using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format. We add two items to d3's date formatter: "%h" for half of the year as a decimal number as well as "%{n}f" for fractional seconds with n digits. For example, *2016-10-13 09:15:23.456* with tickformat "%H~%M~%S.%2f" would display *09~15~23.46*By default the values are formatted using `xaxis.hoverformat`. xsrc Sets the source reference on Chart Studio Cloud for `x`. y Sets the y coordinates of the vector field and of the displayed cones. yhoverformat Sets the hover text formatting rulefor `y` using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format. We add two items to d3's date formatter: "%h" for half of the year as a decimal number as well as "%{n}f" for fractional seconds with n digits. For example, *2016-10-13 09:15:23.456* with tickformat "%H~%M~%S.%2f" would display *09~15~23.46*By default the values are formatted using `yaxis.hoverformat`. ysrc Sets the source reference on Chart Studio Cloud for `y`. z Sets the z coordinates of the vector field and of the displayed cones. zhoverformat Sets the hover text formatting rulefor `z` using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format. We add two items to d3's date formatter: "%h" for half of the year as a decimal number as well as "%{n}f" for fractional seconds with n digits. For example, *2016-10-13 09:15:23.456* with tickformat "%H~%M~%S.%2f" would display *09~15~23.46*By default the values are formatted using `zaxis.hoverformat`. zsrc Sets the source reference on Chart Studio Cloud for `z`. """ def __init__( self, arg=None, anchor=None, autocolorscale=None, cauto=None, cmax=None, cmid=None, cmin=None, coloraxis=None, colorbar=None, colorscale=None, customdata=None, customdatasrc=None, hoverinfo=None, hoverinfosrc=None, hoverlabel=None, hovertemplate=None, hovertemplatesrc=None, hovertext=None, hovertextsrc=None, ids=None, idssrc=None, legend=None, legendgroup=None, legendgrouptitle=None, legendrank=None, legendwidth=None, lighting=None, lightposition=None, meta=None, metasrc=None, name=None, opacity=None, reversescale=None, scene=None, showlegend=None, showscale=None, sizemode=None, sizeref=None, stream=None, text=None, textsrc=None, u=None, uhoverformat=None, uid=None, uirevision=None, usrc=None, v=None, vhoverformat=None, visible=None, vsrc=None, w=None, whoverformat=None, wsrc=None, x=None, xhoverformat=None, xsrc=None, y=None, yhoverformat=None, ysrc=None, z=None, zhoverformat=None, zsrc=None, **kwargs, ): """ Construct a new Cone object Use cone traces to visualize vector fields. Specify a vector field using 6 1D arrays, 3 position arrays `x`, `y` and `z` and 3 vector component arrays `u`, `v`, `w`. The cones are drawn exactly at the positions given by `x`, `y` and `z`. Parameters ---------- arg dict of properties compatible with this constructor or an instance of :class:`plotly.graph_objs.Cone` anchor Sets the cones' anchor with respect to their x/y/z positions. Note that "cm" denote the cone's center of mass which corresponds to 1/4 from the tail to tip. autocolorscale Determines whether the colorscale is a default palette (`autocolorscale: true`) or the palette determined by `colorscale`. In case `colorscale` is unspecified or `autocolorscale` is true, the default palette will be chosen according to whether numbers in the `color` array are all positive, all negative or mixed. cauto Determines whether or not the color domain is computed with respect to the input data (here u/v/w norm) or the bounds set in `cmin` and `cmax` Defaults to `false` when `cmin` and `cmax` are set by the user. cmax Sets the upper bound of the color domain. Value should have the same units as u/v/w norm and if set, `cmin` must be set as well. cmid Sets the mid-point of the color domain by scaling `cmin` and/or `cmax` to be equidistant to this point. Value should have the same units as u/v/w norm. Has no effect when `cauto` is `false`. cmin Sets the lower bound of the color domain. Value should have the same units as u/v/w norm and if set, `cmax` must be set as well. coloraxis Sets a reference to a shared color axis. References to these shared color axes are "coloraxis", "coloraxis2", "coloraxis3", etc. Settings for these shared color axes are set in the layout, under `layout.coloraxis`, `layout.coloraxis2`, etc. Note that multiple color scales can be linked to the same color axis. colorbar :class:`plotly.graph_objects.cone.ColorBar` instance or dict with compatible properties colorscale Sets the colorscale. The colorscale must be an array containing arrays mapping a normalized value to an rgb, rgba, hex, hsl, hsv, or named color string. At minimum, a mapping for the lowest (0) and highest (1) values are required. For example, `[[0, 'rgb(0,0,255)'], [1, 'rgb(255,0,0)']]`. To control the bounds of the colorscale in color space, use `cmin` and `cmax`. Alternatively, `colorscale` may be a palette name string of the following list: Blackbody,Bluered,Blues,C ividis,Earth,Electric,Greens,Greys,Hot,Jet,Picnic,Portl and,Rainbow,RdBu,Reds,Viridis,YlGnBu,YlOrRd. customdata Assigns extra data each datum. This may be useful when listening to hover, click and selection events. Note that, "scatter" traces also appends customdata items in the markers DOM elements customdatasrc Sets the source reference on Chart Studio Cloud for `customdata`. hoverinfo Determines which trace information appear on hover. If `none` or `skip` are set, no information is displayed upon hovering. But, if `none` is set, click and hover events are still fired. hoverinfosrc Sets the source reference on Chart Studio Cloud for `hoverinfo`. hoverlabel :class:`plotly.graph_objects.cone.Hoverlabel` instance or dict with compatible properties hovertemplate Template string used for rendering the information that appear on hover box. Note that this will override `hoverinfo`. Variables are inserted using %{variable}, for example "y: %{y}" as well as %{xother}, {%_xother}, {%_xother_}, {%xother_}. When showing info for several points, "xother" will be added to those with different x positions from the first point. An underscore before or after "(x|y)other" will add a space on that side, only when this field is shown. Numbers are formatted using d3-format's syntax %{variable:d3-format}, for example "Price: %{y:$.2f}". https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format's syntax %{variable|d3-time-format}, for example "Day: %{2019-01-01|%A}". https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format for details on the date formatting syntax. The variables available in `hovertemplate` are the ones emitted as event data described at this link https://plotly.com/javascript/plotlyjs-events/#event- data. Additionally, every attributes that can be specified per-point (the ones that are `arrayOk: true`) are available. Finally, the template string has access to variable `norm` Anything contained in tag `` is displayed in the secondary box, for example "{fullData.name}". To hide the secondary box completely, use an empty tag ``. hovertemplatesrc Sets the source reference on Chart Studio Cloud for `hovertemplate`. hovertext Same as `text`. hovertextsrc Sets the source reference on Chart Studio Cloud for `hovertext`. ids Assigns id labels to each datum. These ids for object constancy of data points during animation. Should be an array of strings, not numbers or any other type. idssrc Sets the source reference on Chart Studio Cloud for `ids`. legend Sets the reference to a legend to show this trace in. References to these legends are "legend", "legend2", "legend3", etc. Settings for these legends are set in the layout, under `layout.legend`, `layout.legend2`, etc. legendgroup Sets the legend group for this trace. Traces and shapes part of the same legend group hide/show at the same time when toggling legend items. legendgrouptitle :class:`plotly.graph_objects.cone.Legendgrouptitle` instance or dict with compatible properties legendrank Sets the legend rank for this trace. Items and groups with smaller ranks are presented on top/left side while with "reversed" `legend.traceorder` they are on bottom/right side. The default legendrank is 1000, so that you can use ranks less than 1000 to place certain items before all unranked items, and ranks greater than 1000 to go after all unranked items. When having unranked or equal rank items shapes would be displayed after traces i.e. according to their order in data and layout. legendwidth Sets the width (in px or fraction) of the legend for this trace. lighting :class:`plotly.graph_objects.cone.Lighting` instance or dict with compatible properties lightposition :class:`plotly.graph_objects.cone.Lightposition` instance or dict with compatible properties meta Assigns extra meta information associated with this trace that can be used in various text attributes. Attributes such as trace `name`, graph, axis and colorbar `title.text`, annotation `text` `rangeselector`, `updatemenues` and `sliders` `label` text all support `meta`. To access the trace `meta` values in an attribute in the same trace, simply use `%{meta[i]}` where `i` is the index or key of the `meta` item in question. To access trace `meta` in layout attributes, use `%{data[n[.meta[i]}` where `i` is the index or key of the `meta` and `n` is the trace index. metasrc Sets the source reference on Chart Studio Cloud for `meta`. name Sets the trace name. The trace name appears as the legend item and on hover. opacity Sets the opacity of the surface. Please note that in the case of using high `opacity` values for example a value greater than or equal to 0.5 on two surfaces (and 0.25 with four surfaces), an overlay of multiple transparent surfaces may not perfectly be sorted in depth by the webgl API. This behavior may be improved in the near future and is subject to change. reversescale Reverses the color mapping if true. If true, `cmin` will correspond to the last color in the array and `cmax` will correspond to the first color. scene Sets a reference between this trace's 3D coordinate system and a 3D scene. If "scene" (the default value), the (x,y,z) coordinates refer to `layout.scene`. If "scene2", the (x,y,z) coordinates refer to `layout.scene2`, and so on. showlegend Determines whether or not an item corresponding to this trace is shown in the legend. showscale Determines whether or not a colorbar is displayed for this trace. sizemode Determines whether `sizeref` is set as a "scaled" (i.e unitless) scalar (normalized by the max u/v/w norm in the vector field) or as "absolute" value (in the same units as the vector field). To display sizes in actual vector length use "raw". sizeref Adjusts the cone size scaling. The size of the cones is determined by their u/v/w norm multiplied a factor and `sizeref`. This factor (computed internally) corresponds to the minimum "time" to travel across two successive x/y/z positions at the average velocity of those two successive positions. All cones in a given trace use the same factor. With `sizemode` set to "raw", its default value is 1. With `sizemode` set to "scaled", `sizeref` is unitless, its default value is 0.5. With `sizemode` set to "absolute", `sizeref` has the same units as the u/v/w vector field, its the default value is half the sample's maximum vector norm. stream :class:`plotly.graph_objects.cone.Stream` instance or dict with compatible properties text Sets the text elements associated with the cones. If trace `hoverinfo` contains a "text" flag and "hovertext" is not set, these elements will be seen in the hover labels. textsrc Sets the source reference on Chart Studio Cloud for `text`. u Sets the x components of the vector field. uhoverformat Sets the hover text formatting rulefor `u` using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d 3/d3-format/tree/v1.4.5#d3-format.By default the values are formatted using generic number format. uid Assign an id to this trace, Use this to provide object constancy between traces during animations and transitions. uirevision Controls persistence of some user-driven changes to the trace: `constraintrange` in `parcoords` traces, as well as some `editable: true` modifications such as `name` and `colorbar.title`. Defaults to `layout.uirevision`. Note that other user-driven trace attribute changes are controlled by `layout` attributes: `trace.visible` is controlled by `layout.legend.uirevision`, `selectedpoints` is controlled by `layout.selectionrevision`, and `colorbar.(x|y)` (accessible with `config: {editable: true}`) is controlled by `layout.editrevision`. Trace changes are tracked by `uid`, which only falls back on trace index if no `uid` is provided. So if your app can add/remove traces before the end of the `data` array, such that the same trace has a different index, you can still preserve user-driven changes if you give each trace a `uid` that stays with it as it moves. usrc Sets the source reference on Chart Studio Cloud for `u`. v Sets the y components of the vector field. vhoverformat Sets the hover text formatting rulefor `v` using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d 3/d3-format/tree/v1.4.5#d3-format.By default the values are formatted using generic number format. visible Determines whether or not this trace is visible. If "legendonly", the trace is not drawn, but can appear as a legend item (provided that the legend itself is visible). vsrc Sets the source reference on Chart Studio Cloud for `v`. w Sets the z components of the vector field. whoverformat Sets the hover text formatting rulefor `w` using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d 3/d3-format/tree/v1.4.5#d3-format.By default the values are formatted using generic number format. wsrc Sets the source reference on Chart Studio Cloud for `w`. x Sets the x coordinates of the vector field and of the displayed cones. xhoverformat Sets the hover text formatting rulefor `x` using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format. We add two items to d3's date formatter: "%h" for half of the year as a decimal number as well as "%{n}f" for fractional seconds with n digits. For example, *2016-10-13 09:15:23.456* with tickformat "%H~%M~%S.%2f" would display *09~15~23.46*By default the values are formatted using `xaxis.hoverformat`. xsrc Sets the source reference on Chart Studio Cloud for `x`. y Sets the y coordinates of the vector field and of the displayed cones. yhoverformat Sets the hover text formatting rulefor `y` using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format. We add two items to d3's date formatter: "%h" for half of the year as a decimal number as well as "%{n}f" for fractional seconds with n digits. For example, *2016-10-13 09:15:23.456* with tickformat "%H~%M~%S.%2f" would display *09~15~23.46*By default the values are formatted using `yaxis.hoverformat`. ysrc Sets the source reference on Chart Studio Cloud for `y`. z Sets the z coordinates of the vector field and of the displayed cones. zhoverformat Sets the hover text formatting rulefor `z` using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format. We add two items to d3's date formatter: "%h" for half of the year as a decimal number as well as "%{n}f" for fractional seconds with n digits. For example, *2016-10-13 09:15:23.456* with tickformat "%H~%M~%S.%2f" would display *09~15~23.46*By default the values are formatted using `zaxis.hoverformat`. zsrc Sets the source reference on Chart Studio Cloud for `z`. Returns ------- Cone """ super().__init__("cone") if "_parent" in kwargs: self._parent = kwargs["_parent"] return if arg is None: arg = {} elif isinstance(arg, self.__class__): arg = arg.to_plotly_json() elif isinstance(arg, dict): arg = _copy.copy(arg) else: raise ValueError( """\ The first argument to the plotly.graph_objs.Cone constructor must be a dict or an instance of :class:`plotly.graph_objs.Cone`""" ) self._skip_invalid = kwargs.pop("skip_invalid", False) self._validate = kwargs.pop("_validate", True) self._set_property("anchor", arg, anchor) self._set_property("autocolorscale", arg, autocolorscale) self._set_property("cauto", arg, cauto) self._set_property("cmax", arg, cmax) self._set_property("cmid", arg, cmid) self._set_property("cmin", arg, cmin) self._set_property("coloraxis", arg, coloraxis) self._set_property("colorbar", arg, colorbar) self._set_property("colorscale", arg, colorscale) self._set_property("customdata", arg, customdata) self._set_property("customdatasrc", arg, customdatasrc) self._set_property("hoverinfo", arg, hoverinfo) self._set_property("hoverinfosrc", arg, hoverinfosrc) self._set_property("hoverlabel", arg, hoverlabel) self._set_property("hovertemplate", arg, hovertemplate) self._set_property("hovertemplatesrc", arg, hovertemplatesrc) self._set_property("hovertext", arg, hovertext) self._set_property("hovertextsrc", arg, hovertextsrc) self._set_property("ids", arg, ids) self._set_property("idssrc", arg, idssrc) self._set_property("legend", arg, legend) self._set_property("legendgroup", arg, legendgroup) self._set_property("legendgrouptitle", arg, legendgrouptitle) self._set_property("legendrank", arg, legendrank) self._set_property("legendwidth", arg, legendwidth) self._set_property("lighting", arg, lighting) self._set_property("lightposition", arg, lightposition) self._set_property("meta", arg, meta) self._set_property("metasrc", arg, metasrc) self._set_property("name", arg, name) self._set_property("opacity", arg, opacity) self._set_property("reversescale", arg, reversescale) self._set_property("scene", arg, scene) self._set_property("showlegend", arg, showlegend) self._set_property("showscale", arg, showscale) self._set_property("sizemode", arg, sizemode) self._set_property("sizeref", arg, sizeref) self._set_property("stream", arg, stream) self._set_property("text", arg, text) self._set_property("textsrc", arg, textsrc) self._set_property("u", arg, u) self._set_property("uhoverformat", arg, uhoverformat) self._set_property("uid", arg, uid) self._set_property("uirevision", arg, uirevision) self._set_property("usrc", arg, usrc) self._set_property("v", arg, v) self._set_property("vhoverformat", arg, vhoverformat) self._set_property("visible", arg, visible) self._set_property("vsrc", arg, vsrc) self._set_property("w", arg, w) self._set_property("whoverformat", arg, whoverformat) self._set_property("wsrc", arg, wsrc) self._set_property("x", arg, x) self._set_property("xhoverformat", arg, xhoverformat) self._set_property("xsrc", arg, xsrc) self._set_property("y", arg, y) self._set_property("yhoverformat", arg, yhoverformat) self._set_property("ysrc", arg, ysrc) self._set_property("z", arg, z) self._set_property("zhoverformat", arg, zhoverformat) self._set_property("zsrc", arg, zsrc) self._props["type"] = "cone" arg.pop("type", None) self._process_kwargs(**dict(arg, **kwargs)) self._skip_invalid = False